Details
ZMAX Electronic Cigarette is a Variable Voltage and Variable Wattage Device. This is a variable volt PV made by Smok Tech that takes vaping to the next level. This is really a variable power mod because you have the option of adjusting either your voltage or your power (watts). The Zmax adjusts from 3.0 to 6.0 Volts in .1 volt increments or 3.0 to 15 Watts in .5 Watt increments. The ZMax has a chrome polished finish and a maximum output of 4 Amps
Menu:
1. Uu- Voltage up
2. Ud- Voltage down
3. So- Standby / on/off
4. Uc- Battery voltage check
5. Ds- Display change / Resistance Ω/Voltage output/Voltage under load 'live'
6. Lo- LED on/off
7. Up- Voltage power (Wattage setting)
Po- Constant power operation
Uo- Constant voltage operation
The ZMax can read your output voltage, battery voltage and cartomizer / atomizer resistance.
In addition, the ZMax has a native eGo style connector that allows you to use both 510 and eGo style cartomizers, atomizers and tanks without adapters. The eGo style connector does not have outside threads but typical eGo style parts fit flush down into the recess that is around the ZMax connector. 510 Tanks and other similar 510 items will screw in and be almost flush with the top.
The ZMax will accept Flat Top or Button Top IMR 18650 batteries with the standard end cap.
Never use non-rechargeable batteries in any device. Only use the recommended batteries for this device.
All adjustments and settings are made with the push button switch. This includes a setting to turn your ZMax off for safe travel in your pocket, bag or purse.
The ZMax includes an instruction manual in English.
There is a 90 day warranty for device failures under normal use.
NOTE:These IMR cells have much lower internal resistance than regular LiIon 3.7V cells and they may end up with a higher ending voltage when charged in certain chargers ( especially older versions of the WF-139 charger ). Please check the voltage of your 18650 IMR battery right out of the charger to see if they are above 4.20V when fully charged with your charger. You can do this with a Multimeter Overcharging above 4.25V may shorten life/cycles. Above 4.50V may even damage them. DO NOT use the charger if it is overcharging IMR cells.
Menu:
1. Uu- Voltage up
2. Ud- Voltage down
3. So- Standby / on/off
4. Uc- Battery voltage check
5. Ds- Display change / Resistance Ω/Voltage output/Voltage under load 'live'
6. Lo- LED on/off
7. Up- Voltage power (Wattage setting)
Po- Constant power operation
Uo- Constant voltage operation
The ZMax can read your output voltage, battery voltage and cartomizer / atomizer resistance.
In addition, the ZMax has a native eGo style connector that allows you to use both 510 and eGo style cartomizers, atomizers and tanks without adapters. The eGo style connector does not have outside threads but typical eGo style parts fit flush down into the recess that is around the ZMax connector. 510 Tanks and other similar 510 items will screw in and be almost flush with the top.
The ZMax will accept Flat Top or Button Top IMR 18650 batteries with the standard end cap.
Never use non-rechargeable batteries in any device. Only use the recommended batteries for this device.
All adjustments and settings are made with the push button switch. This includes a setting to turn your ZMax off for safe travel in your pocket, bag or purse.
The ZMax includes an instruction manual in English.
There is a 90 day warranty for device failures under normal use.
NOTE:These IMR cells have much lower internal resistance than regular LiIon 3.7V cells and they may end up with a higher ending voltage when charged in certain chargers ( especially older versions of the WF-139 charger ). Please check the voltage of your 18650 IMR battery right out of the charger to see if they are above 4.20V when fully charged with your charger. You can do this with a Multimeter Overcharging above 4.25V may shorten life/cycles. Above 4.50V may even damage them. DO NOT use the charger if it is overcharging IMR cells.
