eVod 2 Changeable Bottom Coil Clearomizer
The eVod Clearomizer is a Clearomizer for a eGo that has a changeable coil that allows you to simply unscrew the old coil and screw in a new one.
The replacement coils for the eVod 2 is the same as the newer style Enclosed Kanger Heads. a href="http://altsmoke.com/kanger-dual-coil-enclosed-head.html" tartget="mew"> Kanger Dual Coil (Enclosed Wicks) - Replacement Head V2
Easy to refill, easy to replace and a capacity of about 2ml. These work with devices that have an eGo threading and will not work with 510 threads without an adapter. We do not recommend using an atomizer below 1.5 on an eGo style battery. Learn More
As low as: $6.50
Kanger Dual Coil Atomizer Heads (enclosed wick) is Kanger's latest revision to their Dual Coil Replacement Heads. We carry replacement coils in the following ohms: 0.8, 1.0, 1.2, 1.5, and 1.8. Note: Resistances lower than 1.2 ohm is considered a low coil and should not be used on any eGo Style Battery but should be used with a battery that can handle it. If you're not sure whether or not your battery can handle the lower ohmed coils, get the 1.5 or 1.8 instead. We also don't recommend using anything lower than 1.8 ohm on the Aerotank Turbo.
Mini Protank 3
Aerotank (all version)
Genitanks (all versions)
Emow and Mow (all versions)
Coil removal is an easy process, once your tank is empty remove the entire base and then remove the coil head, replacing it with this replacement Kanger Dual Coil.
This will NOT work on Protank, Protank 2 Mini, Protank 2, or any other item that isn't listed in the compatible list above.<
Please Note: We don't recommend using resistance lower than 1.5 ohm on any eGo Variant battery (twist, ego, riva, etc). Please check with the manufacturer of the device that you are using to verify that your setup can use coils lower than 1.5ohm. Using 1.5 or 1.8 ohm should be fine on eGo Twists and any regulated mod. We don't recommend using anything lower than 1.8 ohm on the Aerotank Turbo. Learn More$2.99 As low as: $2.29
Protank / eVod 1 Replacement Clearomizer Head
The replacement clearomizer head is the part you will be replacing the most. The best part about this Replacement head is that it is compatible with both the Protank 2 & eVod 1 clearomizers. The head attaches to the a base, simply unscrew the old one and toss on the new one. We recommend always having at least 2 spare heads in case one goes out.
They come in one of three resistances:
Learn More$1.89 As low as: $1.45