Boge - SC - Black Cartomizers
These are SINGLE Coil Cartomizers with a Black Wrapper around them.
They are sold individually and labeled different based upon the resistance selected.
These are empty and contain no E-liquid.
Cartomizers are Warrantied based upon DOA, as they are disposable.
These were formerly called 'Yeti-C Cartomizers & Yeti-C Low Resistance Cartomizers'
1.) First remove the White Rubber Protective Cap on the top of the cartomizers. A paper clip easily removes it with little trouble.
2.) Look inside the cartomizer, you will see the white filler material. Take your favorite E-Liquid and drip it directly on to the filler. Try not to drip directly down the center of the cartomizer, but rather around the sides. Normally about 20-25 Drops to completely fill a cartomizer.
3.) Let the cartomizer rest on a paper towel for a few minutes to absorb the material. Please note that 100% VG E-Liquid will take longer to absorb than thinner blends (50/50 or 80/20)
4.) Having a paper towel handy while filling can be helpful. There are other methods to filling cartomizers, and you want to try to keep it wet.
Tips and Tricks:
1. ) Be sure to top off your cartomizer periodically. This differs from person to person as everyone is different. You want to keep the cartomizer filler as wet as possible, so definately make sure to refill based upon your vaping habits. For new vapors, after you've successfully filled a cartomizer vape until you find the first sign of a 'burnt' taste. Keep in mind of this and make sure to refill the cartomizer before the time period. So if it took an hour, make sure to refill it around the 30-40 minute mark. Continuous burnt taste means that the cartomizer is beyond being used and it is recommended to throw away the present cartomizer and start off with a new one. We recommend 5-7 days with a cartomizer that is properly filled at all times. The objective is NOT to even get the slightest burnt taste.
2.) The lower the resistance, the more vapor it will create with 3.7v devices. So make sure to refill accordingly. Use suggestions from tip #1 to figure out when to refill.
3.) Do not use anything lower than 2.5 Ω on 'Mini' Electronic Cigarettes. Standard resistance for cartomizer's are 3.0-3.2 Ω.