The eGo One CT (Constant Temperature) Battery is equipped with Constant Temperature technology. With 3 different usage modes, CT-Ti (Titanium), CT-Ni (Nickel 200) and CW modes, which gives you options of which atomizer heads you use. Learn More
Regular Price: $27.95
Special Price: $21.95
Built off of the very popular platform of the original Wotofo Troll RDA. The Troll V2 comes with many improvements such as a 2 post build deck design, wider 2.7mm post holes to better suit bigger builds and a deeper 10mm build deck. The Troll V2 RDA features two different air flow control option for better vapor production and an adjustable chuff cap. Learn More$34.95
18650 Battery Case Keep your batteries organized and protected! Will fit the majority of the 18650 we sell. AW 3100mAh 18650 Batteries will be a tight fit, but still will close. The cases will not fit the Efest 18650 3100mAh Batteries. Fits 2 x 18650 or 4 x CR123A. Learn More$1.99 As low as: $1.65
eGo Desk Pod Holders are suction cups for your eGo Battery! These are light weight eGo Holders that have a strong suction on most surfaces!
These will fit most eGo sizes and does fit up to 1300mAh eGo Spinner Batteries, but are recommended for up to 1000mAh eGo Batteries.
Note: Keep Away from Children due to the Suction Properties. Does not include eGo Battery. Learn More$0.99
This is a replacement USB charger for the eGo-C, eGo-T, eGo electronic cigarette.
To charge your eGo electronic cigarette battery, simply screw into the charger (finger tight!). The LED will turn RED indicating that the battery is charging. When charging is complete, the LED will turn GREEN.
This USB charger can be plugged into most USB port on your computer, XBOX, etc. You can also use it with our wall to USB adapter or car to USB adapter each sold separately.
-This charger is to be used with Joyetech eGo Series Batteries ONLY, it is not compatible with our eGo-DC kit
The Inde Duo RDA is an newly designed RDA by Jaybo. Featuring a detachable structure and an optional atomizer tube. Also using a vortex flow design airflow control system to fine tune your vape further. This 30mm RDA also includes a 22mm stainless steel atomizer tube. Giving you the option to use the 30mm transparent tube or the 22mm stainless tube to best suit the device you intend to use it on. Learn More
Regular Price: $36.95
Special Price: $24.95
The Aromamizer V2 RDA by Steam Crave brings an all new experience and performance than most RDAs offer. With a fully adjustable Cyclone Air Flow Design that gives you an amazing balance of flavor and vapor production. Just turn the top ring to fine tune your airflow to your needs. This top airflow design also makes the Aromamizer a very leak resistant RDA. Featuring a two post build deck design with PEEK insulator. All around stylish design for form and function. Learn More$44.95
The Tsunami by GeekVape provides an improved Velocity style deck with four 2.1x3.0mm post holes with four 4.0mm Kenedy style air flow holes adjustable for single or dual coil builds. Built with high quality materials, a deckmilled negative post along with postive post with a USA Made PEEK Insulator and adjustable gold plate 510 pin. With a deep juice well and large build deck for even the most complex of builds. The Tsunami includes 3 types of drip tips along with a 510 drip tip adapter for a further customized experience. Learn More$29.95
For some time round RDAs have looked a bit out of place on box mods. Finally there is an atomizer that can complete the look. Introducing the Hellboy replica by Tobeco. This atomizer is features a deep juice well, T style center post, 12 2mm air holes tied with ability to airflow control with Single or Dual coil builds. Learn More
As low as: $19.95
The Sapor RDA by Wotofo is a fresh new look at Rebuildable Dripping Atomizers. The Sapor features a top airflow control system which is complimented with a four post build deck for ease of building. The negative posts are milled on the build deck. A center positive post with peek insulator. Learn More$29.95
The Wotofo Dark Horse RDA is a replica of the Dark Horse Rebuildable Atomizer. It features a center ring that is adjustable for different airflow options. The RDA has gold plated positive posts and come with a wide bore drip tip.
Please Read the Full Description. Learn More
Regular Price: $29.95
Special Price: $19.95
The IGO-W is a Dripping Style Rebuildable Atomizer, it fits most 510 drip tips and has a stainless steel body and base. It features a sealed connector on the bottom of the threading and has two air holes that are on the side of the atomizer. It has an extra post with it to allow for Single or Dual Coil setups. Includes 2 extra O-Rings, Silica, and Wire to assist with your first coil. Also has a spare insulator cap and a extra screw. Due to the nature of this product there is no warranty. This product is for experienced users and requires technical knowledge in order to properly use it.
Note: Please read full description below for more information. Learn More
Regular Price: $19.95
Special Price: $10.95
The Vape Jig is used for wrapping RBA Coils, this makes the process entirely easier than trying to wrap your coils around a screw driver. The Vape Jig comes with 5 different sized rod's: 1mm, 1.6mm, 2.4mm, 3.2mm and 3.5mm. This allows you to have better control and grip when compared to using standalone rods or another metal object. Learn More$12.95
The all new Notch Coil designed by JayBo is a .23 OHM SS316L (Stainless Steel) Coil with similar properties to a clapton coil. The Notch Coils come with pre-installed organic cotton and pre-bent legs for easy install to your Wismec Theorem Atomizer and other similar devices. Learn More
Regular Price: $3.99
Special Price: $2.50As low as: $2.00